Casca Berserk Manga STL files for 3D printing

Note: It is recommended that you use a resin printer for this, I made these specifically for resin printing. You can use an FDM printer if you want but the result will not be so good in detail & quality.

Here you can download the STL files for all the parts, please notice that I have 2 STL files for the head: one with supports & one without, you can use my supported version if you want, but every printer is a bit different so it is recommended that you setup your own support & test it out on your printer in case my version doesn't work for you.

You can print them separately and then assemble together. I add offset at those joints so it can be put together easily, but if your printer setting cause the print to "inflate" then you might need to do same sanding so they can be fit together.

Specification:

Height (without base): 21.5cm.

Need supports to print.

Assembling method: glue.